This new loaf mould replaces the Crafter’s Choice Short and Square silicone moulds.
Half the capacity of the traditional loaf mould and the best mould for test batches!
This loaf works well with 500g of soap and will produce 4 x 125g bars of soap.
Use: Melt and pour, cold process and hot process soap.
Inner Dimensions: 10.2cm x 8.9cm x 6cm.
Soap pour temperature Range: 40 – 230 degrees Celsius.
Care: Avoid using sharp objects to un-mould your soap and hand-wash only as the dishwasher may distort the silicone. Do not use next to open flames, on stove-tops or inside operational ovens.
Tips: You can support the side of the moulds to avoid bowing by propping heavy books or similar objects on either side.
Un-moulding: Once your soap is hard/dry, gently pull the long sides apart allowing air to break the seal all the way down to the bottom. Repeat this for the short sides. Now invert the mould and pull the long sides apart gently and slowly until the base of the soap has been released for the vacuum. Your soap should slowly slide out.
Country of Origin: China