This flexible 15-cavity soap mould has elegant oval cavities with a raised ridge on the top of the soap. They are 70mm x 50mm and 20mm deep (including the ridge). We recommend placing this mould on a chopping board to make it easier to move around whilst it sets.
Bar Size (Water): TBA
Mould Colour: Assorted.
Use For: Melt and pour, cold process and hot process soap.
Soap pour temperature Range: 40 – 230 degrees Celsius.
Care: Avoid using sharp objects to un-mould your soap and hand-wash only as the dishwasher may distort the silicone. Do not use next to open flames, on stove-tops or inside operational ovens.
Un-moulding: Once your soap is hard/dry, gently pull the long sides apart allowing air to break the seal all the way down to the bottom of each cavity. Now, invert the mould and use your thumbs to gently ease each bar out on to a clean surface.
Country of Origin: China