A high quality cavity soap mould and staple for every serious soap maker! These moulds are made from tough silicone to prevent bowing once full. They produce 6 uniform soap bars at a time.
These moulds make a slightly smaller bar, perfect for small hands, guests soaps or specialised bars.
Bar Size (Water): 50g
Bar Size (Basic Clear Base): 53g
Use For: Melt and pour, cold process and hot process soap. You can also use for bath bombs.
Inner Dimensions: Diameter: 57mm; Depth: 22mm
Soap pour temperature Range: 40 – 230 degrees Celsius.
Care: Avoid using sharp objects to un-mould your soap and hand-wash only as the dishwasher may distort the silicone. Do not use next to open flames, on stove-tops or inside operational ovens.
Un-moulding: Once your soap is hard/dry, gently pull the long sides apart allowing air to break the seal all the way down to the bottom of each cavity. Now, invert the mould and use your thumbs to gently ease each bar out on to a clean surface.
Country of Origin: China