6-Cavity Round Silicone Mould

BRAND NEW – JUST ARRIVED!

A high quality cavity soap mould and staple for every serious soap maker! These moulds are made from tough silicone to prevent bowing once full. They produce 6 uniform soap bars at a time.

Bar Size (Water): 140g

Bar Size (Basic Clear Base): 150g

Use For: Melt and pour, cold process and hot process soap. You can also use for bath bombs.

Inner Dimensions: Diameter: 75mm; Depth: 32mm

Soap pour temperature Range: 40 – 230 degrees Celsius.

Care: Avoid using sharp objects to un-mould your soap and hand-wash only as the dishwasher may distort the silicone. Do not use next to open flames, on stove-tops or inside operational ovens.

Un-moulding: Once your soap is hard/dry, gently pull the long sides apart allowing air to break the seal all the way down to the bottom of each cavity. Now, invert the mould and use your thumbs to gently ease each bar out on to a clean surface.

Country of Origin: China