Oval Basic Silicone Mold 1606

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

$22.10 inc. GST

or 4 payments of $5.53 with Afterpay

Only 1 left in stock

Purchase this product now and earn 22 Points!

Product Description

Create simple bars of soap with this classic oval soap mold. This is a staple mold for many soapmakers, and is suitable for natural bars of soap.

Country Of Origin: China

Helpful Product Information:

Style: Bar Avg. Bar Weight: 5 oz
Bar Cavities: 4 Bar Depth: 1″
Bar Length: 2.375″ Bar Width: 3.875″
Max Temperature: 500ºF Mold Capacity (oz): 20

nternational Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.

Additional Information

Weight 0.5 kg
Dimensions 25 × 20 × 10 cm
UPC

Share your thoughts!

5 out of 5 stars

2 reviews

Let us know what you think...

What others are saying

  1. Tanya Leonard

    Rated 5 out of 5
    love the mould

    Tanya Leonard (verified owner)

    i do love the shape of this mould its pretty good as well in durabillity

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. rochellejohnston2010

    Rated 5 out of 5
    Oval Basic Silicone Mold

    rochellejohnston2010 (verified owner)

    Makes pretty soaps

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

If you agree to these terms, please click here.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Oval Basic Silicone Mold 1606 on Instagram

Want to share your instagrams of you with your Oval Basic Silicone Mold 1606? Use the #traymoulds hash tag.